How To Make A Theodolite - How To Make. The target should resemble a plus sign or. A sight on the top of the telescope is used to align the target.
Introduction to Theodolite Setup YouTube
The theodolite is typically mounted on a rugged steel stand, set up so it is level and pointed north, with the altitude and azimuth scales reading zero degrees. In the future, everything depends on the object for which. It is a very accurate way to measure angles. Extend the legs of the tripod until there is about 150mm of travel left and lock the legs. The target should resemble a plus sign or. Bisect point ‘a’, clamp bottom plate screw. If the electronic model is used, zero marks will be fixed automatically. The following terms should be remembered while dealing with a transit theodolite; Setting up a theodolite with either an optical plummet or laser plummet can be quickly achieved in a few easy steps. The eyepiece of the telescope is used to find the target.
In the future, everything depends on the object for which. So i decided to try making a very simple theodolite, which is basically a cheap 48 inch spirit level with a bit of cardboard stuck on the end. Bisect point ‘a’, clamp bottom plate screw. When combined with other instruments such as electronic distance measurements or measuring chains/tapes, these angular measurements can help surveyors create a detailed plan of an area. Set a target up approximately 300 feet away. Glue it firmly.now place a stick on the center of disk which can. Center the bubble with the third footscrew. The following terms should be remembered while dealing with a transit theodolite; The eyepiece of the telescope is used to find the target. You rest this on something and adjust it so it is level. Rotate,glue it wisely.now attach the 2nd disk laterally,perpendicular.
